Protect Your BMW's Finish

You just paid a cool $73,000 for your fashionably new BMW and are cruising down the boulevard enjoying the ride. You zig and zag your way around the slow movers, marveling over the responsive steering and handling engineered into your 750i. As you pull into your driveway, park your sedan, and exit your vehicle, you turn around and your eyes feast upon its stunning Kalahari beige metallic finish. Quite frankly it is the most attractive looking vehicle you have ever owned. Unfortunately, many new BMW owners fail to provide the one level of protection that can keep your car’s expensive finish from permanently losing its luster. What is that? Read on and I will tell you about a product that simply must be part of every luxury car owner’s inventory.

If you haven’t guessed it yet, what I am talking about is a custom fitted car cover for your bimmer. Yes, even if you garage your 750i or other fine vehicle, time and the elements will certainly attack your car’s finish. Sure, you can do regular washes and waxes, but the inevitable will happen: something, somewhere will damage the finish. Besides, do you want to spend every weekend polishing your car? I doubt that!

No, you can’t drive with a car cover on, but you can certainly have a car cover on hand to keep your parked car safe. Yes, there are enough things out there that can harm an expensive finish, even damaging it to the point where only an expensive repair can remedy the insult. The following are some of the hazards just waiting to happen:

1. Bird excrement – You don’t need to be parked under a tree for your car to get hit; a single drive-by bombing by a winged creature can do your finish in.

2. Weather – Rain, snow, ice, and especially hail can damage a car in mere moments.

3. Trees – A small branch can scratch any finish.

4. Sun – Harmful solar rays are bad for your skin and your car’s skin too.

5. Pollution – There is no place on earth that is pollution free. Acid rain and airborne driven particles just love a new car’s finish.

6. Kids – Try keeping your neighbor’s kids away from the car. You may succeed, but hit balls can make a beeline for your wheels. Some car covers even offer protection against minor impacts.

All right, so you are cleverly thinking that your garaged vehicle is immune to such petty insults, right? Well, in one word you are incorrect. Indoor air pollution and dust can take its toll on your car’s finish as can small impacts from anything that falls off of a wall and onto your car.

The solution? Select a car cover that is right for your vehicle. Even if you keep your car garaged most of the time, the best car cover on the market can protect your bimmer from moisture, the sun, dirt, pollution, and small impacts. Choose one that is custom made for your car with side mirror pockets built in and four layers of quick drying polypropylene material to provide the ultimate level of protection. You don’t want something so thin that it doesn’t provide all around protection – you just never know when you will have to have your car outside for an extended period of time – and you don’t want a car cover that entombs your BMW either. Instead, select one that works with your bimmer, not against it.

Best of all, premium car covers can be had for under $200, a worthy investment for any car luxury or not. So, enjoy your new 750i, but give yourself some peace of mind by selecting a car cover that can protect its finish and keep it looking great for many years.

You can find additional info at the following links:

Click Here for more information
Click Here for more information

How Air Duct Cleaning Reduces Allergies?

Does your air cooling system need duct cleaning? Because of its surface area it attracts pollution. Rat dropping can also be in your duct system. Air pollution can also settle in the ducts. An air duct cleaning service can eliminate this contamination. Read this article to discover the importance of cleaning the air cooling system.

Health is the primary benefit of air duct cleaning. According to the United States Environmental Protection Agency, indoor air contains more than 70 times more pollutants than outdoor air.

Air duct cleaning services eradicate the airborne contaminants like the bacteria, fungus, mold spores, pollen and pet dander. Some of these contaminants may enhance allergies and asthma symptoms.

Ductwork cleaning consists of removing hazards from heating and cooling system. These systems consist of parts like air ducts and registers, heat exchangers, drip pans, fan motors and grills, and diffusers.

Duct cleaning may also involve getting rid of contaminants found in heating and cooling coils, and the air handling unit. The symptoms of polluted indoor air include allergies, illnesses, eye irritation, sinus congestion, headache, and sore throat.

Other conditions may also be attributed to polluted air ducts, such as nausea, cold and flu symptoms, fatigue, cough, tightness in chest, wheezing, hypersensitivity, and ENT irritation.

Air duct cleaning cleans and removes moisture. Moisture in these ducts can make them a breeding ground for bacteria and fungi, which can cause diseases in the respiratory system.

Cleaning them will remove harmful organism. By keeping them dry, the further growth of bacteria is prevented. Another waste removed by cleaning the ducts is rodent droppings, hair, and flakes.

If your place is a frequently visited by mice or rats, they may leave their wastes on the ducts, which can be inhaled when air blows through them. Hence, the air you breathe can already be contaminated.

Besides the wastes, debris, plaster and drywall particles, wood, dust, and insulation particles, can accumulated. This debris can be eliminated by duct cleaning. Dust mites and ants feed on such debris and they further leave their waste. Air duct cleaning eliminates all this derby and waste.

When your air ducts in the cooling and heating systems are cleaned and maintained, these systems will last longer. The extended life of these systems is another benefit you can get from employing the air duct cleaning services.

According to experts at Louisiana Cooperative Extension Service, 9 out of 10 system failures are due to dirt accumulated within them. The fan, located inside the air handler, keeps the heat exchanger cool. Its capacity to perform its task is diminished as dirt and debris accumulate.

Cleaning ducts on your cooling and heating systems may prevent pre-mature breakdown and aging. It also makes you save on your energy consumption. Well-maintained equipment makes them run better.

The Environmental Protection Agency maintained that when your heating and cooling systems are cleaned regularly, its efficiency is maintained. A mere .042 inches of dirt on your heating coil can already decrease the efficiency of your heating system by 21%.

Efficient systems work less; this enables you to save energy and money. Air duct cleaning keeps dust away from your furniture and décor. The dusts accumulated within your systems are blown into your house and disseminated everywhere.

Regular air duct cleaning and air cooling systems cleaning keeps your house clean. It also helps to maintain your health. If you have allergies, it will reduce the allergic reactions that you have within your home.

Are you looking for a good air duct cleaning service? Come and setup an appointment at http://www.searsclean.com/ . We remove all contaminates from the duct surfaces. We remove moisture to eliminate fungus and mold. We can sanitize homes from your roof to the floor. Also, get some cleaning tips at Air duct cleaning service .

You can find additional info at the following links:

Click Here for more information
Click Here for more information

The Benefits and Advantages of Rainwater Tanks

We can help Mother Nature by minimize the damage that we do to mother earth, considering the fact that there are various environmental concerns present. Also, it is practical to make use of natural occurring resources as much as possible aside from reduction. When it comes to water supply efficiency, rainwater tanks are suitable for they are a practical and eco friendly way of conserving water.



Rainwater tanks are what exactly? You just have to read a lot if you want to get a lowdown on these earth friendly contraptions. We'll also supply you with the advantages of having an effective rainwater tank.



Collecting rainwater is the main goal of water butts or rain barrels which are commonly known as rainwater tanks. If you're wondering what the other uses of rain gutters, well, it is usually used to harvest rainwater through the roof. You need not trouble yourself and look for rain gutters for there is a big possibility that you already have these on your roofs because gutters are now a standard for modern roof construction.



Having external tanks to be placed outside your home is the first type of rainwater tanks, and the second type will be discussed later. These are usually placed at the back porch, garden sheds and, even garages. The cost of installation is not an issue to some homeowners because they would rather have it for it looks a lot more presentable.



We now go to the next type which is internal or indoor rainwater tanks. There are two usual places for indoor rainwater tanks the kitchen and the underground basement. Also, you can have those rectangular tanks made of polyethylene placed behind walls, covered by concrete blocks.



Obviously, you can't drink water coming from rainwater tanks because they are directly taken from untreated water. But despite this, there still are different ways to use H20. One of these reasons is watering your gardens and washing your car with recycled rainwater.



By installing your own rainwater tank, you are already saving the environment and you also are saving money. Most especially to those who loves plants! But did you know that around 40% of water consumed at home directly goes to tending lawns during hot seasons?



Having rainwater tanks not only saves water but it actually is cheap. Hundreds of models are present today in the market, all you have to do is pick your type of model. But if none of those models attract you, then you may create your own tank by using containers that can hold liquid for a long period of time.



Minor maintenance is needed if you want your rainwater tanks to be in good condition. If you have detachable tanks, it's smart to clean them out once every few months. Also, you have to constantly check on your tanks' layered filters for sometimes, dried leaves are found there.



We owe water our existence. The worsening of climate change, global warming, and financial situations are a reason for you to choose alternative water supplies. With this, we should be thankful that such thing as rainwater tanks existed.



You can get the best rain water tanks information by visiting this website.When you would like to get more information on rainwater tanks check out this site.

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Use LED For Building Lighting To Save Energy And Money

Building lighting is very necessary and equally important is to option for energy saving lighting devices as they save energy and also subsequently are easier on pocket. To achieve this nowadays, LED lighting systems are used which are eco friendly and also good energy savers. These latest lighting techniques guarantee low carbon emission and instant positive flow of cash. It’s a unique way of saving in a secured and guaranteed manner.

In an era when energy proficiency is the need of the hour building lighting is yet another step in this direction and can prove very helpful in a long way for saving energy. The best way to save energy is to control and reduce its consumption and the ultimate method to execute it is by changing old patterns of lighting systems. Energy saving bulbs and lights is the first and very effective approach towards checking the over consumption of energy. Now the time has come to implement the building lighting techniques which saves energy and also saves money. Energy saving technology, energy saving solutions, energy saving bulbs and energy saving lamps hold a promise of solving the energy deficiency problem which is gravely threatening the world.

The U.S department of energy (DOE) has recommended LED lightings for commercial buildings, government buildings and home owners. Environmental synergy can also be achieved by fitting LED building lightings. It is a well known fact that electricity is the most costly and highly consumed energy and reduction in its consumption is the only way of stalking the threat of energy drought looming in front of the world. Lighting fixtures use three times more energy as compared to the air conditioners and highest amount of energy is used in commercial buildings. Hence for lessening carbon foot print, retrofitting of a building is must. This will enable emission of less amount of carbon while saving good amount trees, energy and money as well. For financial problems caused by excess amount of energy consumption, use of LED for building lighting is the right solution. This way the over consumption can be stopped and the environment can also be saved indirectly. Once the retrofitting is !

completed, only a small amount of payment owing to use of light is credited on your name as maintenance and servicing charges of LED are next to none. Therefore, this is an additional advantage.

While going for building lightings only energy star qualified products should be used as they are highly durable and are guaranteed to produce the expected energy saving results. The energy start qualified LED lighting solutions helps in saving energy, money, are environmental friendly, have very low maintenance cost and come in all different designs so as to match the latest modern building or an old one. According to the US Department of Energy use of LED building lightings for the coming 20 years will avoid forming of 40 power plants, lessen the demand for energy in 2027 by 33% and save about $ 265 billion.

You can find additional info at the following links:

Click Here for more information
Click Here for more information

How To Buy And Sell Used Medical Equipment - Used Medical Equipment Through Online Auction Sites

Most healthcare professionals are not only looking to cut costs today but also do what they can to save the environment at the same time. Both of these goals can be achieved in the same way by selling used medical equipment that is no longer being used online. Selling this equipment is easier than ever when using an online site that offers sellers and buyers a chance to buy and sell used medical equipment through an auction. A new website now enables those who wish to sell some of their used medical equipment to do so to buyers who are eager to purchase this equipment for their own healthcare facility.



Medflip is an online auction site that is based in Albuquerque, New Mexico. This company has created an online marketplace for those who wish to buy and sell used medical equipment. Those who use Medflip include hospitals, nursing homes, private practice physicians, clinics and other types of healthcare facilities. Those who need medical equipment can save money by purchasing used medical equipment when they use this online auction site.



There is no reason to keep unused medical equipment in storage or in an office when it can be sold to those who are looking for this equipment for their own offices. Using a site like Medflip can help those who are seeking to get some money from the used medical equipment that they have in storage and sell it to others who may not otherwise have access to this equipment. Those who are looking to save money when purchasing all types of medical equipment can do so simply by purchasing used medical equipment from sellers that are clients of this online auction website. This benefits larger facilities that may be replacing their equipment so that they can recoup some of their expenses as well as smaller facilities that may be outsourcing diagnostic tests to larger facilities to offer this convenience to their patients.



The Medflip website is a safe and secure site where both buyers and sellers can be assured of privacy as well as a protected transaction. None of the personal information that you provide to Medflip is released to any third party and all information is kept confidential. The professional staff of the company can assist a buyer and seller throughout the entire process of the transaction as they have knowledge of how the equipment works and can even help with packaging and shipping items. Sellers do not pay a fee for listing their used medical equipment on the site unless it sells.



Those who visit Medflip looking for used medical equipment can easily find what they are looking for when they use this site. Because all of the equipment is categorized, it makes it easy for those who are looking for a certain product to find it easily when they use this site. Rather than purchasing medical equipment from vendors, it is usually more financially feasible for those who are on a limited budget to purchase used medical equipment from sellers on this online auction site. Medflip does not sell the equipment themselves, but offers both sellers and buyers that use this equipment a chance to connect so that they can have a satisfactory and safe transaction. In addition, the site also offers a want ad section where buyers can post an ad for wanted used medical equipment that may not be listed on the site.



There is a full range of used medical equipment available on the Medflip site. You can find anything from equipment that is used in nursing homes, such as wheelchairs and chair lifts, to that which is found in hospitals for diagnostic testing. There is even dental equipment available on this site. Any facility looking to purchase used medical equipment can find what they are looking for at a reasonable price when they use this site. In many cases, the equipment that is sold is near new. There is even used medical equipment available for those who are operating a rehab facility as well as assisted care healthcare facilities. All of healthcare is covered when you visit Medflip.



You will see for yourself how easy and convenient it is to purchase used medical equipment when you visit the Medflip site. In addition, if you have medical equipment that you are thinking of getting rid of, you can save the environment by selling the used medical equipment on this site as the clients that use Medflip are worldwide. No matter what you have when it comes to medical equipment, chances are that someone will be able to use it to help their own patients achieve a better standard of care.





Author Bio.



Healthcare professionals and those in the medical field can find Used Medical Equipment online when they visit Medflip. This is an online auction site that connects sellers with buyers of Used Medical Equipment.

Plant Trees to Save the Earth and Environment

As we all know that the temperature our planet has goes up day by day. Over the last few years with the changing weather conditions, higher temperature in summer and floods in the spring. We need to do something on a universal scale to solve this problem. One of the best things a person can do to help our suffering planet is to plant a tree. Trees can also reduce the heat, help clean the air, add beauty and color provide shelter from wind and sun.



A lot of people think that there is a lot of work involved with becoming greener and recycle to help the environment and so many people withdrawn away due to thinking this.



If you enjoy gardening or take pleasure in your house I would strongly recommend planting a tree. There is no denying the importance of trees. They are very important to maintain the environmental balance and an important source of energy. Carbon dioxide is continually increasing due to automobile traffic, using heating and air conditioning, manufacturing products in factories and many other activities. Trees and other plants soak carbon dioxide and thereby give off oxygen. As a very important part in the natural atmospheric exchange cycle they are very helpful.



There are many other ways to care for the environment but one of them and most personal ways is to plant trees. You can help the earth by growing more and more trees.



Planting tree is very easy it would take you about ten minute of your precious time. You could also sign up with an environmental group who plant trees in areas to help the environment. If you can plant even a single tree every week, you will change the world. So if you wish to save the earth and environment, it is the time you start planting more trees.







Learn more about Tree Service & Tree Service Portland

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Quality System Automation in the GLP Environment

How Automation Assists Sponsors, Facility Management Personnel, Study Directors and QAUs Comply with Good Laboratory Practices

Maintaining a quality system that complies with the FDA’s GLP regulations requires the cooperation of four groups and/or individuals. The GLP regulations specify these groups as follows:

* Study Sponsors
* Facility Management Personnel
* Study Directors (usually only one per study)
* QAU (Quality Assurance Unit)

Extensive Responsibility

Each of these groups or individuals should be 1) an integral part to the conduct of every non-clinical safety study and 2) should adhere to the respective responsibilities assigned by the FDA. Since these responsibilities are extensive, the automation of GLP management is highly recommended for life science industries that are already fighting against breakneck product-to-market time warps.

Study Sponsors

Sponsors often carry the weight of ultimate responsibility for every non-clinical study. After all, it is the sponsor who will reap success when a study is fruitful or take the traumatic brunt (i.e. usually financial loss) when it fails.

It is easy to understand therefore why the sponsors of many non-clinical studies are eager to ensure the greatest possible speeds and accuracy levels during testing procedures, especially when one considers that GLP related “organizational and documentation requirements increase operational costs of up to 30% compared to [a] non-GLP operation.”1

Study Sponsors Have a Responsibility for Action

According to GLP regulations, a sponsor is responsible for records management processes (even if he or she manages copies of records that are technically already officiated) and the archival of materials that support non-clinical studies. These processes could (of course) be streamlined with solutions slated for GLP management, but first, two questions:

* Are records management and document archival processes really worth automating with a quality system?
* Isn’t records management a fairly simple endeavor?

The answer to these questions are YES and absolutely NOT! When a careful sponsor considers the following he or she is likely to see the overwhelming benefits of investment in records management/document control solutions.

Consider This

When you consider that paper-based submissions have been delivered by the truck load (that is a LOT of paper) to the FDA and that all U.S. material for FDA submissions needs to be saved and archived for 2 years following FDA approval and for 5 years following FDA submission, it is easy to see that the entire archival time period may span across 10 years and involved millions of documents. Who wants to handle those responsbilities manually or even with email, PCs and filing cabinets?

A GLP quality system that incorporates records management and document control capabilities is essential for the more effective fulfillment of study sponsor responsibilities.

Facility Management Personnel

Facility management personnel also have responsibilities entailed by GLP regulations. These responsibilities include the following:

* The designation of the study director;
* Study monitoring;
* The hiring of a new study director if the current director is not performing well;
* Make sure that a QAU is accessible;
* Characterize test articles/control articles;
* Ensure that there are enough qualified employees to conduct the study.

Quality System Characteristics

The facility management personnel would benefit from 1) a quality system that provided the same centralized document control access that a sponsor could access and 2) audit trend capabilities, work forms capabilities (automated), analytics, training capabilities, etc.

Study Director

The study director can be compared to the CEO of a successful company. He or she is the helm of the non-clinical study’s ship and has perhaps more responsibilities than any other person associated with non-clinical study work. These responsibilities, according to the FDA’s website2 assume that a study director will ensure that:

* “The protocol, including any change, is approved as provided by 58.120 and is followed.”
* “All experimental data, including observations of unanticipated responses of the test system are accurately recorded and verified.”
* “Unforeseen circumstances that may affect the quality and integrity of the nonclinical laboratory study are noted when they occur, and corrective action is taken and documented.”
* “Test systems are as specified in the protocol.”
* “All applicable good laboratory practice regulations are followed.”
* “All raw data, documentation, protocols, specimens, and final reports are transferred to the archives during or at the close of the study.”

Quality System Requirements

For a study director a quality system that will encompass document control for SOPs and protocols would be valuable as well as change control capabilities, automated routing/approval features, deviations/nonconformance identification capabilities, CAPA capabilities, etc.

Quality Assurance Unit (QAU)

The quality assurance unit assigned to a non-clinical study holds (as a group entity) the main responsibility for GLP compliance assurance. The QAU’s responsibilities include the following:

* Manage the laboratory’s master schedule;
* Maintain study protocol copies;
* Conduct inspections of the various studies at appropriate intervals;
* Make sure that the inspection records display the appropriate data (i.e. study identity, inspection date, problems, etc.);
* Update management and the study director in regards to any problems discovered during an inspection;
* Submit reports of status to the same (on a periodic basis);
* Become the determiner of deviations that are made from essential documentation.

A Quality System for the Quality Assurance Unit
A quality system for the quality assurance unit would also be of great value if the quality system provided the following:

* Document control for the laboratory’s master schedule, protocol documentation, status reports, etc.;
* Audit management capabilities for inspections;
* Analytics and reporting tools for more effective presentations made easier;
* Deviations and nonconformance capabilities;
* Automated routing and collaboration for documents that need to be approved and collaborated on by a variety of groups or individuals.

Conclusion

GLP management relies on people, and people in return rely on technologies that will streamline routine processes. Many of the GLP processes have not only become routine but have also become gargantuan in proportion. Those groups or individuals with GLP non-clinical study responsibilities and GLP accountability requirements would do well to consider those technology solutions that provide the features mentioned within the content of this article.
________________________________________
1 http://www.labcompliance.com/tutorial/glp/default.aspx?sm=d_a#introduction
2 http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfcfr/CFRSearch.cfm?CFRPart=58&showFR=1&subpartNode=21:1.0.1.1.22.2

Online Dating Safety Tips: 8 Essential Steps to Successful Internet Dating

Copyright (C) 2005 Elena Solomon





Compared to the "real world" dating, some people view online dating as less safe.



Nothing can be further from the truth!



The opinion probably persists due to the fact that in real life we usually meet people who were introduced to us by someone we know and trust, or in a transparent situation, such as at work or school/university.



But because no one introduces you to your online dates, this does not mean online dating is unsafe - quite the opposite!



In fact, meeting someone online is much safer than meeting someone at your local bar: you cannot get hurt by sitting in front of your computer.



All you need to do to make online dating work for you is to exercise some caution. You would not let a stranger into your home and your private life, without getting to know them first, would you? Don't do it online, either.

Here are 8 essential steps that will help you make your online dating experience secure and rewarding.





1. Anonymous Dating



It's a great advantage that contacts entered through an online dating site are anonymous, so you can maintain your privacy, but there are some drawbacks, too - some people might not be what they say they are. While there are not many people like this, they do exist. Most dating sites don't screen their members. You should exercise caution and common sense in your communication with other members.





2. Overseas Contacts



Be especially careful in communication with members from other countries than your own. Some people might try to use your limited knowledge of those countries to take advantage of you. Please be advised to never wire any finance on request of overseas members, whether to help in an emergency or travel arrangements. If you intend to meet overseas members, remember to consult your immigration authorities first, and choose an appropriate option.





3. Getting to know each other



Never give your personally identifiable information to anyone you do not know well. Use the website's anonymous messaging system for the first contacts. Ask many questions and listen to their answers:

· Do they answer the questions you ask?

· Does their story seem credible?

· Don't they avoid certain questions, such as their marital situation, who they live with etc?

· Aren't they too sweet and seem to agree with everything you say?

Those are the red flags that should make you cautious.





4. Sending photos



It is the old truth that the picture is worth a thousand words. Ask the people you are writing to for their photos and send them yours. If they never ask for your photos, this is strange because everyone wants to know how the person they are dating looks like! Don't send old photos or photos where you don't look like your real self: once you meet in real life, the picture should match the person behind it, or they will feel disappointed. But it does not mean you cannot send pictures that present you in the best way: send a photo of yourself with a happy smile; it's always a winner! When your dates look at your photos, they try to figure out what type of person you are: if you look grumpy, they will think you are grumpy. If you look happy and easygoing, this, too, is what they will think of you. If you do not have recent photos, ask a friend with a digital camera to take some pictures of you. Choose the best shots only and erase the ones you don't like. Ask your correspondents how recent the photos are they sent you to avoid a possible disappointment.





5. Giving away your email address



When you feel comfortable with your communication, you can give them your personal email address. Register a separate email account for this purpose, and only use it for your personal correspondence. If something goes wrong in your relationships, you can always close down this account and open a new one. Keep asking questions and discuss different things. If all your communication seems to be going one way, then they probably have their own agenda.





6. Giving away your phone number



When you feel comfortable with the person you have been emailing to, give them your contact phone number, preferably your mobile. Do not give away your work number (or your work email address), ever! After all, you do not want someone to email your boss or phone your office, in case the relationship does not work.





7. Meeting face to face



After you have emailed one another, and talked on the phone a few times, it's time to meet face to face. If people are happy to communicate with you online but don't want to use the phone or meet you in person, this might be due to the fact that they have misrepresented themselves. Real, honest people that seek love and partnership don't want never-ending virtual courtship; they want the real thing.



Only meet in a public place for the first date, and preferably, set up a time limit for the date. For example, you can say you only have half an hour before a business appointment; this will help if the date does not go as you hoped for. A 'coffee date' is a safe bet. If you are a woman, never go to unknown places; instead, suggest your own variant of a place for the meeting, where service personnel knows you, at least visually. If a man is decent, he will honor your request.



Tell someone that you have a date with a person you have met online; it can be your mother or a sibling, a person, who will not judge you. If you don't feel like telling anyone, make a note about the person you are meeting and how you got to know him/her, and place it where this information can be found.



Have your own transport to get home from the place of the meeting; better still, have a friend to fetch you. Never allow your date to take you home, even if something is wrong with your car. Phone a friend or call a taxi instead. Make sure you are not followed when leaving the place of the meeting - especially if no one has shown up.



When you meet your date, don't jump to conclusions straight away. You might unintentionally create an image in your mind, which is different from the real person; this is not their fault; give them a chance. It's quite common to feel awkward at first; simply relax and try not to concentrate on the outcome: doesn't matter if they like you or not, you are still enjoying the date. If you need to concentrate on something, concentrate on having fun! If this helps, remember that they are also nervous and they can only hope you will like them.



Smile! Nothing helps to break the ice better than friendliness and openness. Talk about something that you have shared in your last emails, so that they feel you are indeed the same person they have been talking to for a while.



But still, use caution. Have your mobile phone with you. Don't leave your drink unattended. If you have to leave the table, order a fresh drink on your return.



Pay for yourself. If you decided to never meet this person again, do not tell them about it on the date. Tell about it in an email. If the person asks how the date was, tell them: 'Great! I will email you tonight'. It's not easy to face rejection, so make it as polite and nice, as you can.





8. Advancing your relationship



If you enjoyed the first date, keep seeing one another for a while before moving further. Don't progress too fast; you must really get to know the person before deciding to have a relationship of any kind. If the person shares with you a land-line phone number, presents a business card etc, those are good signs: they trust you and want to continue the relationship. It's now up to you to decide, whether to accept their invitation or not.



Most of all - HAVE FUN, because this is what it's all about. Some people will not be what you are looking for, and you cannot be right for everyone. But if you persist, you will be doing better and better. It takes loads of rubble to find gold. Remember that each encounter is a learning experience that can make you more successful.



You may be yet another person to find your soul mate through an online dating site - just like thousands of other people before you!



Happy dating!



=======================================================

ABOUT THE AUTHOR: Elena Solomon works in online dating since the early days of WWW. She is the exclusive dating consultant of Soulmades.com.au – Internet personals for singles seeking love, romance, relationships and fun.



Elena is the author of "12 Simple Rules for Success in Love, Life and Online Dating". For a limited time, you can get this popular e-book absolutely FREE at http://www.soulmades.com.au/freebook (normally sells for $49.95).



Get it today – the offer is limited!

=======================================================

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Safety Precautions You Need To Keep In Mind When Using Industrial Fire Fighting Equipment

Fire accidents can happen anywhere. That is why all establishments should have fire fighting equipment installation. The occurrence of uncontrolled fire happens due to several causes. If only fire prevention were properly implemented, no accidental fire that destroys lives and property would result. However, as we see, even with utmost efforts, such disasters still take place. So, we resort to early fire detection whenever the unfortunate event cannot be avoided. The earlier a fire is discovered, the easier it can be dealt with. Smoke alarms are imperative in high risk areas. Even homes should have fire alarms.



In the event a fire is discovered, keep in mind that the safety of all the people in the affected place must be preserved. Evacuation of these people should be done as soon as possible. While it is true that only professionals and well-trained individuals should put out the fire, anybody who knows how to use installed industrial fire fighting equipment can smother the flames provided the blaze has not yet consumed a huge portion of an area, a room, an office, or a compartment. Do not hesitate. Do not wait for the flame to grow bigger before attempting to kill it. However, be reminded that this is only applicable for Class A fire or general fire.



Calling for fire brigade should not be delayed and keep in mind that you should not attempt to smother the blaze if in case you don't know what is causing it in the first place. Different materials can be fueling the flames. Fire that originates from wooden materials may be easily put out using water. But those caused by electrical equipment or explosive chemical reactions may be worsened by the spraying of water. Hence, it is imperative to call for immediate help. Nonetheless, supposing you are sure of the origin or the culprit of the blaze, be sure to be able to smother it using the appropriate type of fire extinguisher. Factories and laboratories should have trained personnel who know how to deal with such incidents. Also people working in these risky areas should learn how to put out fire before it spreads and grows bigger. Chemical laboratories and production areas with combustible and flammable materials are extremely susceptible to fire mishaps and so strict and stringent measures and precautions must be observed at all times. Fire could easily spread in these areas to consume any combustible material.



With fire smothering equipment at hand, make sure it works, as you cannot risk running to a blazing room only to discover you're carrying an old, dysfunctional extinguisher. Even with appropriate fire extinguisher, any person should not hurry to the affected area if the blaze has grown uncontrollably or spreading too fast. Keep in mind that the smoke can be stifling and you can be trapped in an area filled with toxic fumes and gases. This is one reason firefighters wear self contained breathing apparatus (SCBA). You certainly don't want to be included in the casualty list.



Jo is an author and publisher for 'Resmar Ltd' (http://www.resmar.co.uk), the number one Marine safety Equipment provider among the world's biggest shipping industries and other top companies. If your firm is looking for superior quality yet fairly priced industrial fire fighting equipment then you ought to have a look at Resmar Ltd.

Safety Induction Video - 36 Workplace Health & Safety Training Topics

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Safety Induction Video - 36 Workplace Health & Safety Training Topics

You can find additional info at the following links:

Click Here for more information
Click Here for more information