Solar Electric Systems - Can It Give Enough Power To All Of My Electrial Appliances At Home?

Solar powered energy technologies supply a fully clean, domestic and renewable energy source. Solar Power International also performs using grassroots and even development institutions to advertise stability as well as greatly enhance high quality of life globally via practical outreach programs. Solar power has been known for five billion years, from the moment the sun was born. And also people have already been utilizing solar energy for a very long time.

Solar powered energy generation is hassle-free and anybody are capable of accomplishing it, allow it to be less complicated on oneself having a great total guide. Solar power may also be utilized to satisfy our electrical energy needs. This electrical energy might be employed as it really is or may be stored inside the battery. Solar powered energy may just be kept in batteries to light a roadside billboard at the evening. Or perhaps the power could possibly be saved in a battery as an emergency roadside mobile phone in cases where no telephone wires are present.

Power effectiveness has been proven as a cost-effective technique for constructing economies with out essentially increasing power usage. As an example, the state of California started applying energy-efficiency measures inside the mid-1970s, which includes developing code and appliance standards with strict efficiency needs. Power efficiency decreases the requirement for power in a developing. If a constructing requirements much less power, it needs less solar power panels, which often drives down the price of the installation for the constructing owner. Power proficiency can be a multidisciplinary field covering anything from environmental and economic science, to social and engineering science. In addition, it involves policy science and psychology.

Solar electric systems can effortlessly cut down or perhaps get rid of one's electrical bill. These photovoltaic systems are usually advantageous to our environment producing electrical energy from sun rays. Solar electric systems may also create electrical energy on cloudy days, even though generation is drastically decreased. Tiny solar electric systems can create a substantial factor to meeting power wants. Solar electric systems differ not merely in terms of high quality, but also cost. You are able to discover each low cost and costly solar energy panels available on the market.

Solar electric systems create electrical energy silently and without requiring almost any moving parts. Sunlight drops on the solar array and produces DC electrical energy. Solar Electric systems could be greatest used by all those other solar applications apart from pool or maybe even water heating. Having a solar hot water heater together having a Solar Electric method would trigger a benefit period of a lot more than 10 years.

Energy alone just isn't sufficient, though. Methods to make a solar program is much less challenging than you might believe and is especially an excellent approach to provide back-up energy or just existing comfort within the back nation or inside the RV. Energy is measured in watts, and also the power you use is measured in kilowatt hours. And this is what you pay for- and what you’ll save lots of- as soon as you install a full solar power method. Energy costs will remain going up, or you'll pay much more for the program. Nevertheless, over the lengthy run, installing now could be more affordable than waiting.

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Troubleshoot Computer Monitor Problems

Perchase high quality HP Pavilion dv9000 Battery at professional battery shop:

http://www.sales-battery.com



Identify whether damaged the power supply

Previous computer monitor used 14-/15-inch LCD PC monitors by using dial to adjust, power switch is the hard-switching. When turn off the monitor power switch. monitor internal power supply is completely cut off. As for the display using CNC technology, its working state controled by the display's internal MCU.When you turn off the monitor power switch, monitor the switching power supply circuit section and the Department of MCU is still in working state. If you do not use display for a long time , it is best to unplug the monitor power plug



1 Damage to the power switch

the power switch of CNC monitor works in the small current state,the rate of damage is very small.When you insert the monitor power plug, if we can hear the slight "crack" sound, indicating the internal monitor switching power supply is normal, while the power fuse intact. If the display of power that does not light, in most cases is not a bad switch, but the power circuit.



2 Fuse damage

If the fuse is damaged, do not easily replace the fuse, and fuse should further identify the causes of damage. Basic judging criteria are as follows:

Glass tube surface is clear and transparent,Only one internal fuse fused.This is due to unexpected electricity surge voltage circuit in the presence or because of frequent switching machine, there may also be the work of the ambient temperature is too low and unexpected fuse.at this time fuse can be replaced directly with the same model.

Note: The display and color TV with the same insurance, rather than the ordinary delay fuse, generally 14,15,17 can be used 3.15A, some 17 5A fuse should be adopted. The fuse for the use of ceramic packages, the best alternative use of the same model in order to avoid frequent replacement of fuse.

Glass tube surface with a yellow and black sputtering dirt,and can see the shape of the internal fuse.This is generally the circuit tube breakdown, due to power PWM control block breakdown

Glass tubes serious burst.This is generally not vulnerable, mostly due to short-circuit power directly. Should be carefully examined before the rectifier circuit, as well as degaussing coil.

or cracking of the surface of glass tubes, difficult to see the internal situation.This is generally a two 220V rectifier diode breakdown, capacitor breakdown caused by short circuit.



3 Damage the power cord.Sometimes because of accident or collision pulling force, internal power supply line may also be broken, then the method of replacement can be used to identify.



4 Plug the power cord and display loose.Sometimes specification is not very standard, and do not consistent with the display of the power outlet very tight, causing poor contact .will result the phenomenon of light is on and off,not working properly. and monitors the power increase is not the same. just like can't connect the power.



Whether abnormal sound

Inherent several normal voice of display: the voice of degaussing circuit magnetization (bang bang, and the degaussing relay synchronization, sound close to the overlap), the internal degaussing relay sound (clicking twice, interval 4S), line circuit relay sound (clicking the once or twice with more force), high-voltage charge voice (the voice creak Lala about 3 seconds).

1,Clear "flap" sound of high-voltage discharge

This is generally due to a high voltage discharge circuit around FBT phenomenon.Return to service. Note: If the display is intermittent or continuous within the "flap" sound of high-voltage discharge, the time should be immediately shut down, or because of high voltage discharge to the breakdown of other components, so that failure extend the tubes caused serious or even scrapped.

2,Relay continuous action "clicking" sound

Note: For numerical display, each time you switch, have a "clicking" sound of the degaussing relay chorus, spaced about 4 seconds, then release.Some also accompanied by S correction circuit relay pull-sound, but this is only at boot time and change the screen mode, it appears.

3,Slight "squeaking" sound

Display a slight internal short circuit, causing power supply overloading caused.Return to service.

Note: Some monitors display panel switch is pressed, the display will be more obvious inside the "creak" sound, because the switching transformer to light loads, self-generated sounds.Some few seconds away, and some may still exist, unless you unplug the monitor power plug. But this is normal.

4,Weak weak "blah" sound

If there is such a sound, sometimes accompanied by power indicator light and dark flashes.This is because the power supply circuit has a serious short circuit.Return to service.

5,Apparent "imperfections" sound

This is not a display switching transformer caused the grounding side loose. Return to service.



Odor judge

1,Sour

If there is such a taste. General internal capacitor overheating or over-voltage burst, the capacitor acid gas spill.

2,Paste flavor

Generally because of the large heat source within the display items such as power tubes, diodes, resistors and other large excess heat caused by burning of the circuit board.

3,Odor

This is generally due to the high-pressure mouth of monitors wet then leakage of the air discharge



Display image is not normal

1,Horizontal line

one or two faint horizontal (approximately 0.2mm width)

For the Sony Trinitron monitors, because of their use of grid-shaped mask plates, in order to prevent deformation of the shadow mask plate added damping line, 15 "for one 17" for two

a few centimeters wide, gray or dark gray bar

If the display appears in the course of a few centimeters wide and deep color interference may be moved up and down and from time to time, when the circuit can be judged is the display part of a Weld-line situation.



2,Vertical line

imperceptible thin vertical line

For the Sony Trinitron monitors, probably because the temperature is too low, mask plate caused a slight deformation, such as this usually disappears when the temperature is normal.

a few centimeters wide, gray or dark gray vertical bar

This is not a field with circuit caused damage or if Weld.

the left thread

Display on the left near the edge of the slightly thin, this is caused because the current production technology, only some display obvious that some not obvious.They are qualified if they do not affect the normal use of both products.

either side of the S-shaped vertical movement of the vertical bar

This usually is due to the power monitor diode rectifier circuits in individual tubes or damage caused by high voltage capacitance decreases.



3,Black spots

1,one or 2-3 small black spots

As the current production technology with no guarantee on every CRT phosphors are completely normal, so there is an individual display or 2-3 small black spots, this is normal.

large black spots

This black spots usually appear in the display center, which is usually because the circuit failure caused by consumption highlights the central position of the phosphor due to premature aging. This situation can not be repaired.

irregular beating of the black spots.This is usually caused by the interference of the internal display.



4,Highlights

small white highlights.With black specks, and is caused because the production process.

Color Highlights.Splashing water droplets or oil droplets due to the CRT surface light scattering. Scrubbing can be removed.

Irregular white block.For the display surface coating is caused due to surface coating to peel.Beyond repair.

Irregular beating of the white spots appear or white line, about 1-2 mm in diameter.This is usually caused by external strong signal interference.However, when the internal circuit failures have this phenomenon.



5,Water ripple

As the current production technology and processes can not completely eliminate the water ripple display (also known as Moore interference), can only decrease.Some customers called the water ripple serious "vortex." Sometimes, like as the wind from one end to the other side of the display. When just opened machine's display, this phenomenon is very obvious, but after half an hour or more, this situation should be reduced or disappear.As long as interference in the allowed range, all is normal.Display a slight edge of water ripple is normal, the more obvious focus more clearly waterlines.We should note that: If you want to display work well should be supplied a standard work environment, otherwise would be a very strange fault.



6,Flicker caused generally due to the refresh rate too low. But if you transferred to 75HZ refresh rate monitor above, the image is still flickering as before, this may be a problem with the internal circuit monitors.



7,Shake

The whole image up and down the whole site at the same time jitter. Poor market performance of the circuit.

About the same time, beat the whole image. Line circuit performance not good.

CRT screen image is only part of the region around chattering.

Image brightness changed significantly, sometimes accompanied by changes in image size.



8,Fuzzy

â‘  Clear beginning, with the use of time, become increasingly blurred.

This is the display line scanning circuit in question may be FBT (Fly Back Transfer) leakage drift, it may be line management, reverse-way diode capacitance reverse process due to poor thermal stability. This failure can only return to service.

â‘¡ First fuzzy, over 10 minutes or half an hour after the clear and normal.

This is usually caused by damp CRT tube socket. Most of the work environment because the display where the humidity too much, not always monitor the use of seat tube due to increased moisture resistance.Minor fault when the continuous operation of the display of several hours can be resolved.If the failure is serious this time to replace CRT sockets.

â‘¢ The CRTtank screen image blurred, illegible text and image detail.

This is generally the focus potentiometer FBT move, or FBT leakage.If the age-old CRT monitor mostly due to the aging of defocusing.If the potentiometer can be adjusted to solve mobile, if the leakage is only through the replacement of FBT FBT.

â‘£ The CRT screen image in one direction as the wind-like tail.

Then you can compare at this time whether the OSD menu is the same phenomenon.If not, this may be faulty graphics card. If so, this is the display of the color processing circuit fault caused.

⑤ CRT screen part of the area with color trim.

This is not a static display good convergence performance. When the display part of the magnetization when there is the phenomenon.The failure need to disassemble to adjust.



9,Deformation

â‘  just opened the screen when there is such a small machine, basically to normal after a few minutes.

This is a display typical "breathing effect" Bale is just too obvious. Display in the work under normal circumstances, the image should not be significantly larger or smaller, if such note display certain elements within the good thermal stability.

â‘¡ image distortion.

Images distorted by adjusting the OSD menu or adjust the unit does not shut off after the loss of normal, indicating that the display memory circuit or MCU control circuit problem.

â‘¢ When the display switch different mode, the image changes significantly, or in 640 * 480 is also Man-screen, but obviously under 800 * 600 screen reduced in 1024 * 768 into a narrow under the section, but the content integrity and image clarity. This is the display's internal B + voltage automatic tracking circuit problems, the general problem is the line scanning block and some features or damage caused by MCU.



10,Splash

Irregular blocks of color on the screen or part of the regional apparent bias in a particular color or Pianan, this is because the display caused by magnetization.If the minor magnetization, degaussing circuit through the display itself (note: do not repeat the degaussing in half an hour.), If the display itself can not be eliminated, you can try degaussing wand will be solved. However, if the display board inside the magnetic shield Meng or deformation, the stain is not removed.



11,Color cast

â‘  If the apparent lack of a color display (R, G, BTANK), this is the problem caused by display signaling pathway.Please check the 15-pin D-shaped plug, see 1,2, 3-pin if they are defective.If there is no signal line is broken or the end of the internal circuit board problem.

â‘¡ If the display screen is constant R or G or B, and adjust the void, which is very touching because the internal CRT or tail circuit.

â‘¢ If significant bias background image a certain color, then you can try to RGB by OSD menu to adjust back to normal.If not, is due to tube aging.





12,Too dark and the display screen at maximum brightness

If the display brightness too dark, but this time adjusting the brightness is 100, then enter the factory mode to adjust the brightness of the deputy.Because the display mode of each of the memory in the display are user data and standard data, when the user to adjust, the display of the MCU must current data and standard data for comparison, in order to prevent causing display circuit protection. If the display changes to the standard data is accidental, then the display appears too dark or too bright situation.



13,Monitor circuit and can not be too bright, dim

If the display brightness is too bright, even if the brightness adjusted to 0, the image is very bright, which is the display brightness control circuit (ABL or ABC circuit) due to loss of control.This failure to disassemble, repair.



14,After the shutdown screen there is a bright spot, about 3-5 seconds and then disappeared

This is because the news highlights display a fault in the circuit, can not effectively prevent the shutdown is still in the high temperature of the cathode to the launch of the electronic screen, because there is no deflection circuit, when the electrons hit the screen to form a diameter of about 3-5 mm spot.If this occurred a long time, will cause premature aging of the screen center of the phosphor, resulting in a marked center of the screen dark spots.This failure to disassemble, repair.



15,Monitor power indicator light, but no images

â‘  just power-charging when the sound pressure, while the power indicator is green, too, after about 5-10 seconds, the indicator light turns orange, and accompanied by loss of high-pressure "creak La La" sound.Then about 15 monitors can be judged is the core of the data lines, line or field sync signal line (13 or 14 gauge needle) has a broken one, so that the display did not mistakenly believe that the host sent the signal, over 4-5 seconds automatically enter low power saving state.

â‘¡ high voltage charge when power is not the voice, even remove the signal line, power indicator light is always green.This is generally line scanning circuit fault, did not produce high pressure.

â‘¢ When a high voltage power-charged voice, no image on the screen, remove the signal line, the power indicator to orange after a while, and accompanied by high-pressure discharge sound.Circuit fault for this situation, CRT is generally not coupled with a certain voltage, then you can look, CRT's filament is not bright.Also possible that the gate voltage is not added.



16,Display the menu settings can not be stored

After each turn needs to adjust the display settings, adjusted to normal use, but data loss after shutdown.This is the display of the memory circuit is faulty, can not save the current settings.When the display memory circuit fails, there are other strange fault phenomena, such as images can not be transferred light (dark), can not transfer full screen, color cast and so on.



Sales-battery.com is an US battery shop,supplies laptop batteries,digital camera batteries,camcorder batteries,now HP Pavilion dv6000 laptop Battery are 30% discount now!!!

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Alternative Source Of Energy From Nuclear Power

Many researchers believe that harnessing the power of the atom in fission reactions is the most significant alternative energy resource that we have, for the fact of the immense power that it can generate.


Nuclear power plants are very “clean-burning” and their efficiency is rather staggering. Nuclear power is generated at 80% efficiency, meaning that the energy produced by the fission reactions is almost equal to the energy put into producing the fission reactions in the first place. There is not a lot of waste material generated by nuclear fission—although, due to the fact that there is no such thing as creating energy without also creating some measure of waste, there is some. The concerns of people such as environmentalists with regards to using nuclear power as an alternative energy source center around this waste, which is radioactive gases which have to be contained.


The radiation from these gases lasts for an extraordinarily long time, so it can never be released once contained and stored. However, the volume of this waste gas produced by the nuclear power plants is small in comparison to how much NOx (nitrous oxide—that is, air pollution) is caused by one day's worth of rush-hour traffic in Los Angeles. While the radiation is certainly the more deadly by far of the two waste materials, the radiation is also by far the easier of the two to contain and store. In spite of the concerns of the environmentalists, nuclear power is actually environmentally friendly alternative energy, and the risk of the contained radiation getting out is actually quite low. With a relatively low volume of waste material produced, it should not be a difficult thing at all for storage and disposal solutions for the long term to be developed as technology advances.


The splitting of an atom releases energy in the forms of both heat and light. Atomic power plants control the fission reactions so that they don't result in the devastating explosions that are brought forth in atomic and hydrogen bombs. There is no chance of an atomic power plant exploding like a nuclear bomb, as the specialized conditions and the pure Plutonium used to unleash an atomic bomb's vicious force simply don't exist inside a nuclear power plant. The risk of a “meltdown” is very low. Although this latter event has happened a couple of times, when one considers that there are over 430 nuclear reactors spread out across 33 nations, and that nuclear reactors have been in use since the early 1950s, these are rare occurrences, and the events of that nature which have taken place were the fault of outdated materials which should have been properly kept up. Indeed, if nuclear energy could become a more widely accepted form of alternative energy, there would be little question of their upkeep being maintained. Currently, six states in America generate more than half of all their electrical energy needs through nuclear power, and the media are not filled with gruesome horror stories of the power plants constantly having problems.

You can find additional info at the following links:

Click Here for more information
Click Here for more information

Welding Helmets - Safety, Work Freely And Produce Better Results

Being in a highly specialized and dangerous profession, welding professionals are always advised to wear protective gear including welding helmets to ensure that they do not meet any unfortunate accident.

While on a welding or repairs job, a welding helmet offers a welder the much needed protection to safeguard his eyes, face and neck against the risk of flash burns, sparks and excessive heat. A welding helmet has many benefits and the most important one is that it prevents arc eye and retina burns which are not only painful but can also even lead to a complete loss of vision. A welding helmet can protect one’s eyes against both these conditions, arc eye and retina burns, where the cornea gets inflamed due to direct exposure to the highly concentrated ultraviolet and infrared rays emitted by the welding arc.

Apart from these safety benefits, welding helmets serve many other purposes as well. While increasing the safety for the welders, welding helmets also improve upon their confidence leading to better welding ability resulting in higher quality welds. A welding helmet ensures safety for welders and helps them to work freely and produce better results.

Selecting a suitable welding helmet can be difficult if one is not familiar with the latest lens technology and national safety standards. Some key points should be kept in mind before you decide upon the welding helmet to purchase as it is the most important piece of safety gear.

The first point to take note of is to decide what type of lens is the most suitable for you - standard or passive. Standard welding helmets are less expensive can prove difficult to manage for beginners as they might find it hard to correctly position the welding gun or the torch after lowering the welding helmet in place. One might also find a standard welding helmet hard to manage when welding in difficult place like under a car. Standard welding helmet may also cause a bit if neck discomfort.

Passive welding helmets or auto-darkening welding helmets offer better abilities to the welders. Passive welding helmets are equipped with electric filter lens and adjustable features to make welding an easier job. Most of the passive welding helmets are powered by a combination of battery and solar power and several light sensors are mounted near the lens to detect the welding arc. Once an arc is initiated, the lens gets darkened hundred times faster than a blink of an eye.

As such, it is necessary for welders to choose the best possible welding helmet and not compromise on the quality or functions of the welding helmet.

Tattoos - Tips And Tricks

Did you know that you can possibly remove your tattoos and piercing manually? There are moments in a life of a person that he wanted to get a tattoo, and some time late in his life would want to remove the tattoo. Someone or something really in the life of a tattooed person might motivate him or her to get rid of the tattoos. Removing tattoos is possible. Though, there tattoo colors that are very difficult to eradicate. Black however, is the easiest to be removed. A person may persevere to get away with his tattoo manually but the process is similar to scraping the skin, which is harmful and can be infectious. Some scars are likely to be left during the removal of the tattooed skin. Aside from pain which one must endure during the removal of tattoo, the procedure is expensive. Deciding to remove either tattoos or piercings manually must be done wisely. Better yet, if you are not confident about the manual or self-removal of tattoos and piercing, look for better means of removing them that guarantee your safety. Some can heal their piercing in the long run, if no heavy jewelry is dangled in it. In other words, it was left without any jewels being put on which would enlarge the whole.

Did you know why some people decide to remove their tattoos and piercing? There are individuals who during their lifetime, would come across to a lifes turning point and for some personally determined reasons would have new love interests, paradigm and fashion statement shift or the realization that a tattoo and piercing are not their edge points for better employment or job opportunities. In their lives, they come across to a realization that even without the body piercing and body tattoo, they can also become distinctly themselves unique, vibrant and with individualized identity. The teens during the puberty age must counter identity crises; otherwise they would carry the unsettled crises even during their later stages. When a person has bumped with the reality that body art isnt after all good to everyones eyes, s/he may still remove his tattoos and piercings in order to be better acceptable in the society. Nowadays, most of the human races or groups are no longer much linked to tattoos and piercings as their ceremonial rites, instead, these two become options of arts or interests. There are consequences however, if one would choose to remove his tattoos and piercing. The pains are bearable especially if the interested persons are strongly driven by his will to please his or her love interest, new affiliations and the likes.

Did you know of issues which you have to consider in having you piercings be removed? Are your pierced areas infected? If they are infected, then the removal of piercings seems impossible. The infection in this case, has its tendency to spread throughout the patients body. Whether you have acquired an infection or not from body piercing, you need to consult a health care professional for immediate treatment. The medical consultation must be done prior to the removal of the body piercing. To those who had nostril piercings, they have to be carefully guided of the probable health outcome when infection occurs because the pierced body part is prone to worse cases of infections. Removing a piercing may leave a permanent reminder of the piercing, a keloid. Closing a pierced nostril or eyebrow will likely result to a lifetime scar. Whenever you have first decided to have a part of your body be pierced, bear in mind if that part is safe to be pierced. Consider the potential infections and the consequences if you would think of removing it years after. These issues must be given to the patients as part of orientation about what they are entering into the life of a person with piercing. Body piercing is a choice but it must be a carefully thought and planned product of the freewill.

Did you know that Body Piercing and Body Tattoo are not only a fashion? Why do many people choose to have body piercing and tattoos? Are they not threatened by the danger the pierces and tattoos can bring forth their health? Popularity of these body arts must not only be the stimulus that prompts many to try these body modifications as well. The royalty and the courage that body piercing and tattoos are associated with, also had influenced the Egyptian Pharaohs to pierce their navels as a rite of passage, the Roman soldiers show their manhood through pierced nipples, Mayas show their spiritual rituals through pierced tongues, Victorians pierced their nipples and or genitals and other people do other body markings for other rites aside from fashion purposes. Out of being a spiritual rite, a number of natives do avail any piercing and tattooing on their body parts. Because, these have been practiced for centuries, they are hard to be refuted in aspects that involve sanitation of the materials used. Either for the sake of fashion or rites, the persons who want to have body tattoos or piercing must be forewarned of the effects these would do unto their body instead of just blindly following the norms or the fashion of the contemporary times.

Did you know of factors that impede the easier removal of tattoo? The removal of tattoo is not at all easy and possible in one session. Its complete removal, however, is difficult because of some factors. The age of tattoo is one of the factors. If a person has acquired the tattoo for almost three to five decades, the tendency to remove the colors or ink of the tattoo becomes a big challenge. The size of the tattoo and inks types and colors are also few of the factors that make the removal of tattoo a bit hard. A dermatologist can help resolve your worries about your tattoo and how it can be better removed. Your dermatologist can prescribe anesthesia if s/he found out that you need it. In addition, the dermatologist can inform you if all of your tattoos have the possibility to be removed. The process of removing the tattoo does not take an overnight process; rather the whole process reaches for about several months. The removal experience of tattoo is almost likened to getting a new tattoo because of almost similar pains. The removed tattoo become a wound part and must be scrupulously looked after and not be scrubbed or rubbed. Tattoo is supposedly designed for permanence but if you may still have it remove when you decide it only that the whole removal procedure is worse than the first time you had your body tattoo.

Daniel Les is a Tattoo Expert who specialize in designing exclusive body tattoo designs and market them online.

Video Source: Youtube

Gun Safety

There are 21,700,000 websites on the subject of GUN safety. If that doesn’t tell you just how important this subject isÂ…nothing will! Police Departments all around the country, medical groups, gun safety organizations (including the NRA), and thousands of other agencies, organizations, and associations have all dedicated websites to this subject.

Articles appear discussing the 10 commandments of gun safety, 47 rules of gun safety, what kids should be taught about gun safety, what parents should know about gun safety, and millions of other helpful hints, tips, rules, commandments, etc.

ButÂ… there is one common theme that is present in every article referencing gun safety and that is thisÂ… if you have a gun in your home it should be stored in a gun safe or minivault, you should have a trigger lock for your gun, ammunition should be stored in a separate place, and you should keep the key in a safe place where no one can find it but you!

• How else do you account for the fact that over 40,000 kids bring a gun to school each year?
• How else do you account for the fact that there are almost as many deaths each year from gunshot wounds as by auto accidents?
• How else do you account for the fact that most teen suicides are caused by guns?

In a modern world where guns and gun violence can be seen virtually every minute of every day on TV, in the movies, and on video games, what message are we sending if we fail to educate and inform our children about gun safety?

When do we start? Experts tell us that when a child is first aware that guns exist is the time for the education process to begin. None of us would ever let our small kids play on a busy street. But many of us, especially those of us who have guns in our homes, wait until it is way too late to talk to our kids about gun safety. Is there anything more inquisitive than a child? Thinking back to when we were kids ourselves, what is one of the absolutely first things we did when we were left alone? We started to explore! Honestly now, didn’t you know where more things were in your house than your parents did? Weren’t they always asking you where something was? Well, not much has changed in the meantime!

If you have a gun stored in a dresser drawerÂ…get a gun safe!

If you have a gun hidden under your pillowÂ…get a gun safe!

If you have a gun sitting on top of the refrigeratorÂ…get a gun safe!

I have spent the better part of my career as a Public Safety Director. The amount of times that my Police Department responded to calls for service where a gun was involved is staggering! I learned several very important lessons:

• Guns and alcohol do not mix.
• Guns and depression do not mix.
• Guns and domestic altercations do not mix.
• Guns and children do not mix.
• And finallyÂ…and most importantlyÂ…you do not get a second chance to do the right thing!

You have a chance to do the right thing today! If you don’t have one, get a gun safe or minivault. If a close friend, relative or neighbor you know has a gun, these also make excellent gifts and show that you care. An old axiom states that there are lies, damned lies, and statistics! Don’t let someone you love become a statistic. Secure your gun---TODAY!

There are 21,700,000 websites on the subject of GUN SAFETY. If that doesn’t tell you just how important this subject isÂ…nothing will! Police Departments all around the country, medical groups, gun safety organizations (including the NRA), and thousands of other agencies, organizations, and associations have all dedicated websites to this subject.

Articles appear discussing the 10 commandments of gun safety, 47 rules of gun safety, what kids should be taught about gun safety, what parents should know about gun safety, and millions of other helpful hints, tips, rules, commandments, etc.

ButÂ… there is one common theme that is present in every article referencing gun safety and that is thisÂ… if you have a gun in your home it should be stored in a gun safe or minivault, you should have a trigger lock for your gun, ammunition should be stored in a separate place, and you should keep the key in a safe place where no one can find it but you!

• How else do you account for the fact that over 40,000 kids bring a gun to school each year?
• How else do you account for the fact that there are almost as many deaths each year from gunshot wounds as by auto accidents?
• How else do you account for the fact that most teen suicides are caused by guns?

In a modern world where guns and gun violence can be seen virtually every minute of every day on TV, in the movies, and on video games, what message are we sending if we fail to educate and inform our children about gun safety?

When do we start? Experts tell us that when a child is first aware that guns exist is the time for the education process to begin. None of us would ever let our small kids play on a busy street. But many of us, especially those of us who have guns in our homes, wait until it is way too late to talk to our kids about gun safety. Is there anything more inquisitive than a child? Thinking back to when we were kids ourselves, what is one of the absolutely first things we did when we were left alone? We started to explore! Honestly now, didn’t you know where more things were in your house than your parents did? Weren’t they always asking you where something was? Well, not much has changed in the meantime!

If you have a gun stored in a dresser drawerÂ…get a gun safe!

If you have a gun hidden under your pillowÂ…get a gun safe!

If you have a gun sitting on top of the refrigeratorÂ…get a gun safe!

I have spent the better part of my career as a Public Safety Director. The amount of times that my Police Department responded to calls for service where a gun was involved is staggering! I learned several very important lessons:

• Guns and alcohol do not mix.
• Guns and depression do not mix.
• Guns and domestic altercations do not mix.
• Guns and children do not mix.
• And finallyÂ…and most importantlyÂ…you do not get a second chance to do the right thing!

You have a chance to do the right thing today! If you don’t have one, get a gun safe or minivault. If a close friend, relative or neighbor you know has a gun, these also make excellent gifts and show that you care. An old axiom states that there are lies, damned lies, and statistics! Don’t let someone you love become a statistic. Secure your gun---TODAY!